HABA Heavy Duty All Geared Lathe Machine (Bed: 15")
Premium heavy duty all geared lathe machine. Available in 12", 14" and 15" centre height with bed lengths from 7ft to 26ft.
Special Highlights
- ★Premium tool room grade finish and workmanship
- ★Available in 12", 14" and 15" centre height options
- ★All geared head for consistent power and minimal vibration at all speeds
- ★12 spindle speeds from 30 to 1060 RPM for versatile heavy machining
- ★Norton Gear Box with Double Shaft included as standard
- ★Two spindle bore options - 79mm and 104mm
- ★40 feed selections for precise longitudinal and transverse control
- ★Bed lengths from 7ft to 26ft to suit varied workshop requirements
- ★HABA brand - manufactured by Max Machine Tools to tool room standards
- ★Comes with 9 standard accessories including Norton Gear Box with Double Shaft
Specifications
| Model No. | HAG1253 | HAG1254 | HAG1453 | HAG1454 | HAG1553 | HAG1554 |
|---|---|---|---|---|---|---|
| Centre Height | 304 mm (12") | 304 mm (12") | 355 mm (14") | 355 mm (14") | 380 mm (15") | 380 mm (15") |
| Duty Type | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty | Heavy Duty |
| Type of Bed | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways |
| Swing Over Bed | 580 mm | 580 mm | 680 mm | 680 mm | 730 mm | 730 mm |
| Swing Over Cross Slide | 390 mm | 390 mm | 490 mm | 490 mm | 540 mm | 540 mm |
| Swing in Gap | 890 mm | 890 mm | 990 mm | 990 mm | 1040 mm | 1040 mm |
| Width of Bed | 375 mm | 375 mm | 375 mm | 375 mm | 375 mm | 375 mm |
| Length of Gap in Front of Face Plate | 200 mm | 200 mm | 200 mm | 200 mm | 200 mm | 200 mm |
| No. of Spindle Speeds | 12 | 12 | 12 | 12 | 12 | 12 |
| Spindle Speed Range | 30 to 1060 RPM | 30 to 1060 RPM | 30 to 1060 RPM | 30 to 1060 RPM | 30 to 1060 RPM | 30 to 1060 RPM |
| Taper in Spindle | MT-6 | MT-6 | MT-6 | MT-6 | MT-6 | MT-6 |
| Spindle Bore | 79 mm | 104 mm | 79 mm | 104 mm | 79 mm | 104 mm |
| Spindle Nose | A2-8 | A2-8 | A2-8 | A2-8 | A2-8 | A2-8 |
| Lead Screw Diameter / Pitch | 38 mm / 4 TPI | 38 mm / 4 TPI | 38 mm / 4 TPI | 38 mm / 4 TPI | 38 mm / 4 TPI | 38 mm / 4 TPI |
| No. of Threads/Range (With Full Norton Gear Box) | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI |
| No. of Feeds | 40 | 40 | 40 | 40 | 40 | 40 |
| Range of Longitudinal Feeds | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm |
| Range of Transverse Feeds | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm |
| Tail Stock Spindle Diameter | 60.3 mm | 60.3 mm | 60.3 mm | 60.3 mm | 60.3 mm | 60.3 mm |
| Taper in Tail Stock Quill | MT-4 | MT-4 | MT-4 | MT-4 | MT-4 | MT-4 |
| Cross Slide Travel | 325 mm | 325 mm | 325 mm | 325 mm | 325 mm | 325 mm |
| Compound Slide Travel | 190 mm | 190 mm | 190 mm | 190 mm | 190 mm | 190 mm |
| Tail Stock Sleeve Travel | 170 mm | 170 mm | 170 mm | 170 mm | 170 mm | 170 mm |
| Tool Post Square | 145 mm | 145 mm | 145 mm | 145 mm | 145 mm | 145 mm |
| Tool Shank Size | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Suitable Electrical HP | 5 HP (3 Phase) | 5 HP (3 Phase) | 5 HP (3 Phase) | 5 HP (3 Phase) | 5 HP (3 Phase) | 5 HP (3 Phase) |
| Bed Length 7ft | HAG1253/7 - ABC: 1000mm | HAG1254/7 - ABC: 1000mm | HAG1453/7 - ABC: 1000mm | HAG1454/7 - ABC: 1000mm | HAG1553/7 - ABC: 1000mm | HAG1554/7 - ABC: 1000mm |
| Bed Length 9ft | HAG1253/9 - ABC: 1600mm | HAG1254/9 - ABC: 1600mm | HAG1453/9 - ABC: 1600mm | HAG1454/9 - ABC: 1600mm | HAG1553/9 - ABC: 1600mm | HAG1554/9 - ABC: 1600mm |
| Bed Length 10ft | HAG1253/10 - ABC: 1900mm | HAG1254/10 - ABC: 1900mm | HAG1453/10 - ABC: 1900mm | HAG1454/10 - ABC: 1900mm | HAG1553/10 - ABC: 1900mm | HAG1554/10 - ABC: 1900mm |
| Bed Length 12ft | HAG1253/12 - ABC: 2500mm | HAG1254/12 - ABC: 2500mm | HAG1453/12 - ABC: 2500mm | HAG1454/12 - ABC: 2500mm | HAG1553/12 - ABC: 2500mm | HAG1554/12 - ABC: 2500mm |
| Bed Length 14ft | HAG1253/14 - ABC: 3100mm | HAG1254/14 - ABC: 3100mm | HAG1453/14 - ABC: 3100mm | HAG1454/14 - ABC: 3100mm | HAG1553/14 - ABC: 3100mm | HAG1554/14 - ABC: 3100mm |
| Bed Length 16ft | HAG1253/16 - ABC: 3700mm | HAG1254/16 - ABC: 3700mm | HAG1453/16 - ABC: 3700mm | HAG1454/16 - ABC: 3700mm | HAG1553/16 - ABC: 3700mm | HAG1554/16 - ABC: 3700mm |
| Bed Length 18ft | HAG1253/18 - ABC: 4300mm | HAG1254/18 - ABC: 4300mm | HAG1453/18 - ABC: 4300mm | HAG1454/18 - ABC: 4300mm | HAG1553/18 - ABC: 4300mm | HAG1554/18 - ABC: 4300mm |
| Bed Length 20ft | HAG1253/20 - ABC: 4900mm | HAG1254/20 - ABC: 4900mm | HAG1453/20 - ABC: 4900mm | HAG1454/20 - ABC: 4900mm | HAG1553/20 - ABC: 4900mm | HAG1554/20 - ABC: 4900mm |
| Bed Length 22ft | HAG1253/22 - ABC: 5500mm | HAG1254/22 - ABC: 5500mm | HAG1453/22 - ABC: 5500mm | HAG1454/22 - ABC: 5500mm | HAG1553/22 - ABC: 5500mm | HAG1554/22 - ABC: 5500mm |
| Bed Length 24ft | HAG1253/24 - ABC: 6100mm | HAG1254/24 - ABC: 6100mm | HAG1453/24 - ABC: 6100mm | HAG1454/24 - ABC: 6100mm | HAG1553/24 - ABC: 6100mm | HAG1554/24 - ABC: 6100mm |
| Bed Length 26ft | HAG1253/26 - ABC: 6700mm | HAG1254/26 - ABC: 6700mm | HAG1453/26 - ABC: 6700mm | HAG1454/26 - ABC: 6700mm | HAG1553/26 - ABC: 6700mm | HAG1554/26 - ABC: 6700mm |
| Price | Request Quote | Request Quote | Request Quote | Request Quote | Request Quote | Request Quote |
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
Overview
The HABA Heavy Duty All Geared Lathe Machine (Bed: 15") is a precision-grade geared head lathe manufactured by Max Machine Tools under the HABA brand. Available in three centre height options - 304mm (12"), 355mm (14") and 380mm (15") - with bed lengths from 7ft to 26ft and a 15" bed width. Features hardened bed ways, 12 spindle speeds from 30 to 1060 RPM, MT-6 spindle taper and A2-8 spindle nose. Available in two spindle bore options - 79mm and 104mm. Norton Gear Box with Double Shaft is included as standard, providing 24 metric pitches (0.5 to 15 mm) and 44 inch threads (2 to 60 TPI) out of the box. Standard accessories included: Chuck Back Plate, Centre Adapter, Dead Centres (2 Nos), Tool Post Spanner, Motor Pulley, Thread Dial Indicator, Change Gear Set, Chip Tray and Norton Gear Box with Double Shaft.
Variants & Pricing
| Model | Size | Availability | Price | |
|---|---|---|---|---|
| HAG1253 | 12" CH - 15" Bed | In Stock | Request Quote | |
| HAG1254 | 12" CH - 15" Bed | In Stock | Request Quote | |
| HAG1453 | 14" CH - 15" Bed | In Stock | Request Quote | |
| HAG1454 | 14" CH - 15" Bed | In Stock | Request Quote | |
| HAG1553 | 15" CH - 15" Bed | In Stock | Request Quote | |
| HAG1554 | 15" CH - 15" Bed | In Stock | Request Quote |
Accessories & Add-ons
Independent Chuck
4-jaw independent chuck for holding irregular workpieces
Self Centring Chuck
3-jaw self-centring chuck for fast and accurate round workpiece holding
Chuck Back Plate Extra
Additional chuck back plate for quick chuck changeover
Steady Rest
Fixed steady rest for supporting long workpieces during turning
Follow Rest
Follow rest for turning slender components without deflection
Face Plate
Face plate for mounting irregular or large workpieces
Carrier Plate
Carrier plate for between-centre turning operations
Taper Turning Attachment
For machining tapered components with precision
Coolant Pump with Tank and Fittings
Coolant system to extend tool life and improve surface finish
Rear Tool Post
Rear-mounted tool post for parting and grooving operations
Electricals (Motor, Wiring, Switch, V-Belts and Fittings)
Complete electrical package including motor, wiring, switch and V-belts
Panel Board
Electrical panel board for organised and safe machine control
Splash Guard
Protects operator and machine from coolant and chip splash
Foundation Round Plate with Levelling Bolts
For proper machine installation and levelling on shop floor
Quick Change Tool Post
For fast and precise tool changeover during operations
Key Way Attachment
For cutting keyways directly on the lathe
Padel Stop
Foot-operated padel stop for quick and safe machine shutdown
Electrical Third Shaft
Electrical third shaft for additional drive options
FAQs
More in All Geared Lathe Machine
HABA Extra Heavy Duty All Geared Lathe Machine (Bed: 18")
HABA
HABA Extra Heavy Duty All Geared Lathe Machine (Bed: 22")
HABA
HABA Extra Heavy Duty All Geared Lathe Machine (Bed: 26")
HABA
HABA Heavy Duty All Geared Lathe Machine (Bed: 13")
HABA
HABA Light Duty All Geared Lathe Machine
HABA
HABA Medium Duty All Geared Lathe Machine
HABA
Compare All All Geared Lathe Machine Models
| Specification | HABA Extra Heavy Duty All Geared Lathe Machine (Bed: 18") | HABA Extra Heavy Duty All Geared Lathe Machine (Bed: 22") | HABA Extra Heavy Duty All Geared Lathe Machine (Bed: 26") | HABA Heavy Duty All Geared Lathe Machine (Bed: 13") | HABA Heavy Duty All Geared Lathe Machine (Bed: 15") | HABA Light Duty All Geared Lathe Machine | HABA Medium Duty All Geared Lathe Machine |
|---|---|---|---|---|---|---|---|
| Centre Height | 406 mm (16") | 508 mm (20") | 558 mm (22") | 267 mm (10-1/2") | 304 mm (12") | 165 mm | 215 mm |
| Duty Type | Extra Heavy Duty | Extra Heavy Duty | Extra Heavy Duty | Heavy Duty | Heavy Duty | Light Duty | Medium Duty |
| Type of Bed | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways | Hardened Bed Ways |
| Swing Over Bed | 785 mm | 985 mm | 1075 mm | 525 mm | 580 mm | 325 mm | 420 mm |
| Swing Over Cross Slide | 480 mm | 680 mm | 750 mm | 320 mm | 390 mm | 175 mm | 240 mm |
| Swing in Gap | 1100 mm | 1300 mm | 1400 mm | 800 mm | 890 mm | 500 mm | 620 mm |
| Width of Bed | 455 mm | 558 mm | 660 mm | 325 mm | 375 mm | 240 mm | 277 mm |
| Length of Gap in Front of Face Plate | 250 mm | 250 mm | 250 mm | 200 mm | 200 mm | 115 mm | 125 mm |
| No. of Spindle Speeds | 9 | 9 | 8 | 12 | 12 | 8 | 8 |
| Spindle Speed Range | 19 to 310 RPM | 19 to 310 RPM | 14 to 200 RPM | 30 to 1060 RPM | 30 to 1060 RPM | 40 to 1200 RPM | 40 to 1200 RPM |
| Taper in Spindle | MT-6 | MT-6 | MT-6 | MT-6 | MT-6 | MT-5 | MT-5 |
| Spindle Bore | 100 mm | 100 mm | 115 mm | 50 mm | 79 mm | 38 mm | 38 mm |
| Spindle Nose | A2-8 | A2-8 | A2-11 | A2-6 | A2-8 | Threaded / A2-4 | A2-4 |
| Lead Screw Diameter / Pitch | 44.4 mm / 2 TPI | 44.4 mm / 2 TPI | 44.4 mm / 2 TPI | 38 mm / 4 TPI | 38 mm / 4 TPI | 25.4 mm / 4 TPI | 31.75 mm / 4 TPI |
| No. of Threads/Range (With Full Norton Gear Box) | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI | Metric: 24/0.5 mm to 15 mm Pitch - Inch: 44/2 to 60 TPI |
| No. of Feeds | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| Range of Longitudinal Feeds | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm | 0.066 - 2 mm |
| Range of Transverse Feeds | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.5 mm | 0.0165 - 0.50 mm | 0.0165 - 0.5 mm |
| Tail Stock Spindle Diameter | 76 mm | 76 mm | 100 mm | 60.3 mm | 60.3 mm | 38.1 mm | 50.8 mm |
| Taper in Tail Stock Quill | MT-5 | MT-5 | MT-5 | MT-4 | MT-4 | MT-3 | MT-4 |
| Cross Slide Travel | 500 mm | 550 mm | 550 mm | 280 mm | 325 mm | 175 mm | 230 mm |
| Compound Slide Travel | 250 mm | 250 mm | 250 mm | 145 mm | 190 mm | 125 mm | 140 mm |
| Tail Stock Sleeve Travel | 250 mm | 250 mm | 250 mm | 170 mm | 170 mm | 120 mm | 140 mm |
| Tool Post Square | 175 mm | 175 mm | 200 mm | 120 mm | 145 mm | 88 x 88 mm | 100 mm |
| Tool Shank Size | 38 mm | 38 mm | 38 mm | 25 mm | 25 mm | 20 mm | 20 mm |
| Suitable Electrical HP | 7.5 HP (3 Phase) | 7.5 HP (3 Phase) | 15 HP (3 Phase) | 3 HP / 5 HP (3 Phase) | 5 HP (3 Phase) | 1 HP (3 Phase) | 2 HP (3 Phase) |
| Bed Length 7ft | HAG1684/7 - ABC: 700mm | HAG20224/7 - ABC: 700mm | — | HAG1032/7 - ABC: 1000mm | HAG1253/7 - ABC: 1000mm | — | — |
| Bed Length 9ft | HAG1684/9 - ABC: 1300mm | HAG20224/9 - ABC: 1300mm | — | HAG1032/9 - ABC: 1600mm | HAG1253/9 - ABC: 1600mm | — | — |
| Bed Length 10ft | HAG1684/10 - ABC: 1600mm | HAG20224/10 - ABC: 1600mm | HAG22265/10 - ABC: 1200mm | HAG1032/10 - ABC: 1900mm | HAG1253/10 - ABC: 1900mm | — | — |
| Bed Length 12ft | HAG1684/12 - ABC: 2200mm | HAG20224/12 - ABC: 2200mm | HAG22265/12 - ABC: 1800mm | HAG1032/12 - ABC: 2500mm | HAG1253/12 - ABC: 2500mm | — | — |
| Bed Length 14ft | HAG1684/14 - ABC: 2800mm | HAG20224/14 - ABC: 2800mm | HAG22265/14 - ABC: 2400mm | HAG1032/14 - ABC: 3100mm | HAG1253/14 - ABC: 3100mm | — | — |
| Bed Length 16ft | HAG1684/16 - ABC: 3400mm | HAG20224/16 - ABC: 3400mm | HAG22265/16 - ABC: 3000mm | HAG1032/16 - ABC: 3700mm | HAG1253/16 - ABC: 3700mm | — | — |
| Bed Length 18ft | HAG1684/18 - ABC: 4000mm | HAG20224/18 - ABC: 4000mm | HAG22265/18 - ABC: 3600mm | — | HAG1253/18 - ABC: 4300mm | — | — |
| Bed Length 20ft | HAG1684/20 - ABC: 4600mm | HAG20224/20 - ABC: 4600mm | HAG22265/20 - ABC: 4200mm | — | HAG1253/20 - ABC: 4900mm | — | — |
| Bed Length 22ft | HAG1684/22 - ABC: 5200mm | HAG20224/22 - ABC: 5200mm | HAG22265/22 - ABC: 4800mm | — | HAG1253/22 - ABC: 5500mm | — | — |
| Bed Length 24ft | HAG1684/24 - ABC: 5800mm | HAG20224/24 - ABC: 5800mm | HAG22265/24 - ABC: 5400mm | — | HAG1253/24 - ABC: 6100mm | — | — |
| Bed Length 26ft | HAG1684/26 - ABC: 6400mm | HAG20224/26 - ABC: 6400mm | HAG22265/26 - ABC: 6000mm | — | HAG1253/26 - ABC: 6700mm | — | — |
| Length of Bed | — | — | — | — | — | 1370 mm (4'-6") | 1825 mm (6') |
| Admit Between Centres | — | — | — | — | — | 660 mm | 1000 mm |
| View → | View → | View → | View → | ← Current | View → | View → |